Professional Studio Arm
The PSA1+ is the ultimate studio boom arm for podcasters, streamers and broadcasters. Its innovative parallelogram spring design ensures ultra-smooth movement and precise microphone placement in any position, while its fully damped internal springs and neoprene arm cover eliminate mechanical noise for completely silent operation. Integrated cable management ensures your setup is tidy and its extended reach and full 360-degree rotation make it easy to position your microphone exactly where it needs to be. Take your content to the next level.
- Premium professional studio boom arm for podcasters, streamers, broadcasters, and creators
- Innovative parallelogram spring design for precise mic placement and ultra-smooth movement
- Fully damped springs for completely silent operation
- Superior isolation from keyboard, mouse and desk noise
- Integrated cable management for both USB and XLR cables
- Compatible with any microphone or shockmount using a standard thread, weighing between 94g and 1.2kg, including the NT-USB Mini, PodMic, Procaster, Podcaster, Broadcaster and more
Sleek. Stable. Silent.
Combining sleek looks with completely silent operation and peerless stability, the PSA1+ is the perfect mount for your microphone. Its innovative parallelogram spring design keeps the placement of your mic constant, even as the height is adjusted, and ensures movement is ultra-smooth. Rubber contact points provide superior isolation from knocks, bumps, and keyboard or mouse clicks while its fully damped springs keep noise to an absolute minimum.
Just Add Your Mic
Whether you're streaming, podcasting or broadcasting, the PSA1+ will slot seamlessly into your setup – just add your favourite mic and start recording. It is compatible with all standard shockmounts and both end and side-address microphones are accommodated by the flexible mounting system. Microphones weighing as little as 94g all the way to 1.2kg are supported with complete stability and the integrated cable management system can be used with both XLR and USB cables.
Flexible by Nature
The PSA1+ is designed to be as flexible as you need it to be. Perfectly balanced movement, extended reach and full 360-degree rotation allow you to position your microphone with absolute precision, so you always sound your best. High-quality locking nuts on the mounting system make it easy to adjust the angle of your mic and both a threaded desk mount and a padded desk clamp are included, making it a breeze to integrate into any home or professional studio.
1 x PSA1+
1 x 3/8 to 5/8 Adaptor
1 x Desk Mount Clamp
1 x Threaded Desk Mount
Click below to find out more about this product.
To attach your microphone to the PSA1+, simply screw the mirophone clip or shockmount onto the bolt assembly's thread in a clockwise direction. If your microphone clip or shockmount uses a 5/8 thread, you can use the included 3/8 to 5/8 adaptor. For more info, see the PSA1+ quick start guide.
Yes. After securely tightening the thumb knobs on both sides of the mounting head, there will be just the right amount of tension on the bolt assembly so that you can rotate your microphone by hand, while also preventing any unintentional movement. This handy feature ensures complete freedom of movement when positioning your microphone, allowing you to make minor adjustments up, down, left and right wihtout having to reset your thumb knobs each time.
Yes, you can place your microphone in either the upright or downward position with the PSA1+. When in the upright position, you may need to further tighten the thumb knobs to ensure there is enough tension on the bolt assembly to prevent unintentional rotation of the microphone.