Wireless GO II
Kompaktes drahtloses Mikrofonsystem
Das kleinste und erste wirklich kabellose Mikrofon der Welt ist wiedergeboren worden. Das Wireless GO II ist ein ultrakompaktes und extrem vielseitiges Funkmikrofonsystem, das aus einem Zweikanal-Empfänger und zwei Sendern besteht. Die Sender fungieren als Ansteckmikrofon und verfügen über ein hochwertiges integriertes Mikrofon für einen komplett drahtlosen Betrieb. Sie können aber auch als Beltpack mit einem externen Lavalier verwendet werden und liefern kristallklaren Ton für jede Anwendung zur Erstellung von Inhalten.
Der Wireless GO II verfügt über eine Reihe leistungsstarker Funktionen, darunter universelle Kompatibilität mit Kameras, Mobilgeräten und Computern, erweiterte Reichweite (200 m Sichtlinie) und verbesserte Übertragungsstabilität, On-Board-Aufnahmefunktionen und vieles mehr. Das ist kabelloses Audio der nächsten Generation.
- Drahtloses Zweikanal-Mikrofonsystem für die gleichzeitige Aufnahme von zwei Tonquellen
- Digitale 2,4-GHz-Übertragung der Serie IV, 128-Bit-Verschlüsselung - kristallklares Audio in bis zu 200 m Entfernung (Sichtverbindung), optimiert für extrem stabilen Betrieb in dichten HF-Umgebungen
- 3,5 mm TRS-Analogausgang, USB-C- und iOS-Digitalausgang - universelle Kompatibilität mit Kameras, Mobilgeräten und Computern
- On-board-Aufnahme - über 24 Stunden interner Speicher
- Mono- oder Stereo-Aufnahmemodus - nehmen Sie jeden Kanal separat auf oder kombinieren Sie sie für ultimative Flexibilität in der Postproduktion
- Sicherheitskanal, dreistufige Verstärkungsregelung (0dB, -12dB, -24dB - erweiterbar auf 10-Stufen)
- Eingebauter wiederaufladbarer Lithium-Ionen-Akku - bis zu 7 Stunden Akkulaufzeit
- Entwickelt und hergestellt in RØDEs Präzisionsfertigung in Sydney, Australien.
The Wireless GO II takes wireless versatility to new heights. Featuring a 3.5mm TRS analog output for plugging into cameras, plus a digital audio output via USB-C for plugging into smartphones, tablets and computers, it is perfect for content creation, filmmaking, on-camera or on-stage presentations, vlogging, YouTubing, livestreaming and more.
On-board recording means you never have to worry about dropouts or audio issues again, while the flexible gain control lets you precisely tailor the output to your device. The Wireless GO II also offers the option to record each channel separately or combine the two, ensuring ultimate flexibility in post-production.
Ultra-Compact Wireless Audio
The Wireless GO II offers the same pocket-sized form factor as the original Wireless GO. The transmitters and receiver weigh less than 32g, taking up virtually no space in a camera kit bag, backpack, handbag or briefcase. It also comes supplied with a handy carry pouch to keep everything tidy and secure. The Wireless GO II's unique clip design makes it quick and easy to mount onto clothing or a camera cold shoe, mobile camera rig, boom pole, or any cold shoe accessory – ultra-compact wireless audio for any recording situation.
Professional Sound. Seamless Connectivity
The Wireless GO II has been designed to deliver professional-quality sound while being incredibly simple to use. The transmitters and receiver come auto paired, ensuring a seamless set-up process every time. RØDE’s Series IV 2.4GHz digital transmission with 128-bit encryption delivers a range of up to 200m (line of sight) and is optimised for extremely stable operation in areas with a high level of RF activity, including dense urban environments, shopping malls, universities, convention centres and offices.
Each transmitter features a high-quality in-built omnidirectional condenser capsule for completely wireless recording, plus a 3.5mm TRS input for plugging in a lavalier microphone. The Wireless GO II is also supplied with twist-and-lock furry windshields for recording in windy or adverse weather conditions. Crystal-clear, professional sound in any situation.
RØDE Central is an easy-to-use desktop and mobile companion app for the Wireless GO II that allows you to configure your device settings anywhere, unlock advanced features, optimise and export recordings (desktop only), access device information, and update to the latest firmware. Download it for free to unlock the full potential of your Wireless GO II.
Note: OS Requirements – MacOS 10.13 or later; Windows 10 Version 1803 or later; iOS 14 or later; Android 9.0 or later.
RØDE Connect is a free podcasting and streaming software solution that is now compatible for use with the Wireless GO II. RODE Connect makes it easier to record or stream with professional-quality audio from your computer.
RØDE Connect allows up to four physical guests, with two Wireless GO II’s, to be connected to a single computer. It features an intuitive, easy-to-use interface inspired by the RØDECaster Pro.
Note: OS Requirements – MacOS 10.13 or later; Windows 10 Version 1803 or later.
Wireless GO II Single
The Wireless GO II is also available in a single set. Offering the same ultra-compact form factor and unmatched feature set as the original, but with just one transmitter instead of two, it’s the ultimate wireless microphone for solo content creators. The receiver in the single set is identical to the dual-channel edition, meaning an additional transmitter can easily be paired for dual-channel recording.
- 1 x Dual-channel receiver
- 1 x Transmitter
- 2 x Fur windshields
- 2 x SC20 (USB-C cables)
- 1 x SC5 (3.5mm TRS cable)
- 1 x Carry pouch
Acoustic & Electrical Specifications
macOS 10.11 above
Windows 10 and above
TX Length: 44 Width: 45.3 Height: 18.3
RX Length: 44 Width: 45.5 Height: 18.3
3 x SC20
1 x SC5
3 x Furry
1 x Pouch Bag
2 x Transmitters
1 x Receiver
3 x Furry Windshields
3 x SC20 USB-C to USB-A Cables
1 x SC5 TRS to TRS Memory Cable
1 x Carry Pouch
Click below to find out more about this product.
Yes. This is possible using the supplied SC5 cable or any other TRS to TRS cable and the VXLR Pro or VXLR+ adaptor to convert the signal. You can even use the SC11 splitter cable and two adaptors to break out the Wireless GO II's two channels onto separate output jacks for dual channel recording.
The Wireless GO II's windshields feature a twist-and-lock bayonet connector, which ensures an extremely strong connection. To attach them securely, align the two white dots on the windshield with the black dots on the receiver, then push the windshield down and twist to lock it in place. Reverse the process to remove them.
The Wireless GO II's fine gain control can be enabled/disabled via RØDE Central. To activate it, open RØDE Central, plug in the receiver, navigate to the settings page, and toggle the 'Gain Mode' button to 'Fine'. This will expand the Wireless GO II's three-stage pad to a 10-stage pad, which goes from 0dB to -30dB in 3dB increments. It also gives you access to an extra 6dB of gain reduction, which is useful if you have a particularly sensitive camera or recording device. Read more about the gain control at the Wireless GO II Learning Hub.
RØDE’s Series IV digital transmission delivers an increased range of 200m and improved transmission stability, particularly in environments with lots of RF activity (such as dense urban areas, shopping malls, universities and convention centres).
The Wireless GO II transmitters are capable of recording over 24 hours of compressed audio or 7 hours of uncompressed audio each. Once storage on the device is full, the oldest saved recordings will be overwritten. Recordings can be accessed, optimised, exported, and deleted via RØDE Central. Find out more about on-board recording via the Wireless GO II Learning Hub.
No, the Wireless GO II is not currently compatible with the original Wireless GO.
RØDE Central is a companion app for the Wireless GO II that allows you to control all of the functions of the transmitters and receiver, update firmware, and access features such as on-board recording, the fine gain control and safety channel. To download and find out more about RØDE Central, head to the Wireless GO II Learning Hub.
The Wireless GO II and original Wireless GO share the same compact form factor, unique cold shoe clip, in-built microphone, and easy-to-use design. However, the Wireless GO II is a dual channel wireless microphone system, which consists of two transmitters and a single receiver. It also offers an extensive feature set that make it extremely versatile, including both an analog 3.5mm TRS output for plugging into cameras and a digital audio output via USB for plugging into smartphones, tablets and computers, on-board recording, 200m range with improved transmission stability, flexible gain controls, safety channel, complete control over all features and functions via RØDE Central, and much more.
The Wireless GO II gives you the option to either record in 'Merged' or 'Split' mode (toggled by pressing and holding the pair and gain buttons on the receiver for three seconds or via RØDE Central). This allows you to record each transmitter onto separate channels on the output ('Split' mode) or combine the two into a single output ('Merged' mode). When it's in 'Split' mode, there will be two output level meters, when it's in 'Merged' mode, there will be just one. Read more about this at the Wireless GO II Learning Hub.
When activated, safety channel mode will record a second track of audio at -20dB as a backup in case your sound source gets loud unexpectedly and causes the main channel to distort. To enable safety channel mode, open the RØDE Central app, plug in the Wireless GO II receiver, navigate to the settings screen, and click the 'Safety Channel' toggle (note: this can only be activated in 'Merged' mode). Read more about the safety channel at the Wireless GO II Learning Hub.
The Wireless GO II features a digital audio output via USB-C, which allows you to record directly into any smartphone, tablet, or computer without the need for adaptors or other audio interfaces. The Wireless GO II comes with three USB-C to USB-A cables for charging and also connecting to computers with a USB-A input. To connect to a computer, Android smartphone or tablet, or any other device with a USB-C input, you will need a USB-C to USB-C cable, such as the RØDE SC16. To connect to an iOS device, such as an iPhone or iPad, you will need a Lightning Accessory Cable (USB-C to Lightning) cable – either the RØDE SC15 or SC19. The Wireless GO II is MFi-certified, meaning it will interact seamlessly with all iOS devices.
The Wireless GO II's on-board recording function is enabled and disabled via the RØDE Central app. To activate it, plug in the transmitter(s), navigate to the settings screen and toggle the 'Record' button to either 'Always' or 'Backup'. In 'Always' recording mode, the transmitter will start recording audio as soon as it is switched on and will continue recording until it is switched off, regardless of whether is it connected to the receiver. In 'Backup' recording mode, the transmitter will start recording audio when it connects to the receiver. When the receiver is switched off, the recording will stop.
When on-board recording is enabled, a red 'REC' icon will appear on that transmitter’s channel on the receiver. These recordings can be accessed, optimised, exported, and deleted via RØDE Central. Read more about on-board recording at the Wireless GO II Learning Hub.
To connect the Wireless GO II to your iOS device, you need an MFi-certified 'Lightning Accessory Cable'. This is different to the ‘charge and sync’ cable that may have been included with your Apple device and other standard USB-C to Lightning cables. The RØDE SC15 is an MFi-certified Lightning Accessory Cable and is recommended for use with the Wireless GO II for best performance.
When using RØDE Central on a Mac device the Operating System Requirements are 10.13 or later.
When using RØDE Central on a Windows device the Operating System Requirements are Windows 10 Version 1803 or later.