Important information about purchasing from the US.
If you see a price that looks too good to be true, it probably is! Beware of counterfeit goods. Check our website to make sure you’re purchasing from an authorized RØDE reseller. For quick reference NO FBA reseller (FULFILLMENT BY AMAZON) on Amazon is authorized. You can view a current list of unauthorized US dealers here.
Wireless GO ist eine einzigartige, überaus erschwingliche und ultra-kompakte Funkstrecke, bei der im Sendemodul bereits ein Mikrofon eingebaut ist – echtes „Clip-and-go“! Es ist die perfekte drahtlose Mikrofonlösung für Content Creator aus allen Bereichen: Filmemacher, Moderatoren, Reporter, Vlogger und viele andere.
Sender (TX)
Das Wireless GO Sendemodul (TX) ist mit 44 x 45,3 x 18,5 mm ultrakompakt, wiegt lediglich 31 g und hat eine hochwertige Kugel-Kondensatorkapsel eingebaut, wodurch es unmittelbar als Ansteckmikrofon genutzt werden kann. Man kann es aber dank der integrierten 3,5 mm Buchse auch als Miniatur-Gürtelsender für ein externes Lavalier-Mikrofon verwenden. Das Wireless GO System ist blitzschnell einsatzbereit und ideal für spontane Außen-Reportagen: niemals eine Action verpassen, wenn sie passiert – und das ganz ohne Kabel, dafür aber mit großartigem Sound!
Empfänger (RX)
Das Empfängermodul ist mit seinen nur 44 x 46,4 x 18,5 mm genauso kompakt und wiegt ebenfalls nur 31 g. So wird Ihre Ausrüstung nicht zur Belastung und es erleichtert z.B. die Montage auf gängige Gimbals. Der Clip passt außerdem exakt in den Standard-Blitzschuh Ihrer DSLR-Kamera, man kann den Empfänger aber auch an einem Kameragurt oder Kleidungsstück befestigen. Im Lieferumfang ist ein 3,5 mm TRS-Kabel, über welches Sie das Empfängermodul mit dem Mikrofoneingang Ihrer Kamera verbinden – beziehungsweise über optionale RØDE-Adapter und -Kabel auch mit einem Audio-Recorder, einer GoPro oder einem Smart- oder iPhone. Außerdem verfügt der Empfänger über eine 3-stufig schaltbare Vordämpfung (0 dB, -12 dB und -24 dB), um den Ausgangspegel genau an den Eingang Ihrer Kamera oder Ihres Recorders anzupassen.
Wireless GO – auch in weiß lieferbar
Das Wireless GO System ist auch in weiß erhältlich, wodurch der Sender bei heller Kleidung oder in heller Umgebung noch unauffälliger ist. Perfekt zum Beispiel auf Hochzeiten und ähnlichen Events, bei Interviews mit Geschäftsleuten und bei vielen anderen Gelegenheiten.
Features
Transmission type | 2.4GHz Digital Frequency Agile System |
Acoustic Principle | Pre-polarised pressure transducer |
Polar Pattern | Omnidirectional |
Equivalent Input Noise @ Maximum Gain | 21.8dB (A-Weighted) |
Frequency Range | 50Hz - 20kHz |
External Mic Input | 20Hz - 20kHz |
Maximum Output Level | +3dBu |
Maximum SPL | 100dB SPL (1kHz @ 1m) |
Dynamic Range | 100dBA (Mic Preamplifiers) |
Power Requirements | Inbuilt Li-po battery rechargeable via USB |
Battery Life | Up to 7 hours |
Analog Inputs | 3.5mm TRS lavalier microphone input (transmitter) |
Analog Outputs | 3.5mm TRS (receiver) |
Computer Connectivity | USB (firmware update) |
OS Requirements | (For firmware update only) macOS 10.11 above Windows 10 and above |
Latency | 6ms |
Form Factor | Clip-on pack |
Weight (g) | TX: 31 RX: 31 |
Dimensions (L x W x H, mm) | TX: 44 × 45.3 × 18.5 RX: 44 x 46.4 x 18.5 |
Included Accessories | 2 x fur windshield, 1 x pouch, 2 x USB-A to USB-C cables, 1 x SC2 cable |
Up to 8 Wireless Go sets can be used at the same time in the same location.
The receiver will connect to a smartphones 3.5mm TRRS input with an SC7 cable. This also applies to tablets. Additional adaptors may be needed in newer smartphone models to allow a 3.5mm input. iPhones with a Lightning input will require a Lightning to 3.5mm adaptor, or an external interface like the SC6-L 3.5mm to Lightning adapter in combination with the SC7 cable.
The Wireless GO is compatible with all of RØDE's lavalier microphones. The Lavalier GO and RØDELink Lav will connect directly to the Wireless GO transmitters TRS input.
No, the Wireless GO uses a 1-to-1 connection. You can only pair one transmitter per receiver at a time.
If you need to mic up a second person you will need an additional Wireless GO system. You can attach both receivers to the cold shoe of your camera using the DCS-1 dual cold shoe mount. Then use the SC11 splitter cable to connect both receivers to the single mic input of your camera. If you want to connect the Wireless GOs to your phone you will also need the SC4 adapter cable – simply plug the SC11 single input into the SC4 and then into your mobile device.
Wenn Sie Fragen oder ein Problem mit dem Wireless GO haben, springen Sie zu unserer Kontaktseite, um die Adresse des für Sie zuständigen Vertriebs ausfindig zu machen